Lò Reflow HELLER 1809MKIII

Mô tả

Details

• Power input (3-phase) standard: 480 volts
• Circuit breaker size: 100amps @ 480v
• Kilowatt: 8.5-10.5 continuous
• Typical operating current: 20-25amps @ 480v
• Optional power input available: 208/240/380/400/440/415 VAC
• Frequency: 50/60 Hz
• Continuous Zone Open: Standard
• Single-phase operation: Not available
• Equipment size: L4650 × W1370 × H1600 (mm)
• Net weight: 1588kg
• AMD or Intel Computer: Standard
• Recipe storage:> 500
• Flat-screen display: Standard
• Windows operating system: Windows XP
• Large PCB width: 20 cm (50.8 cm)
• Space required between PCBs: 0.0 cm
• Conveyor length loading: 18 cm (46 cm)
• Conveyor length unloading: 18 cm (46 cm)
• Heating tunnel length: 105 cm (254 cm)
• Process gap above mesh belt: 2.3 cm (5.8 cm)
• Mesh belt spacing: 0.5 cm (1.27 cm)
• Large conveying speed: 74cm / Min (188 cm / min.)
• Conveyor direction from left to right: standard
• Conveyor direction from right to left: optional
• Conveyor speed control type: closed loop
• Height from floor-standard: 37.0 cm ± 2.0 cm (94 cm ± 5 cm)
• Floor height-optional: 32.6 cm + 3.9 cm /-. 4 cm (83 cm + 10 cm / -1 cm)
• Clearance above the conveyor: 1.15 cm (2.9 cm)
• Clearance under the conveyor: 1.15 cm (2.9 cm)
• PCB support foot length: .187 cm (4.75 mm)
• 3 mm long support pin: optional
• Small / large board width: 2.0 cm-18 cm (5-45.7 cm)
• Edge-holding track heater: Not required
• Power width adjustment: standard
• Computer-controlled width adjustment: optional
• Automatic lubrication system: standard
• Heater type: Instant response open coil
• Heater material: nickel-chromium alloy
• Infrared panel heater (for curing): optional
• Temperature controller accuracy: ± .1 ° C
• Cross-band temperature tolerance: ± 3.0 ° C
• Heater power per zone: 6000 watts
• Temperature range standard: 25-350 ° C
• High temperature up to 400 ° C: optional
• High temperature up to 450 ° C: optional
• Insulation type: Calcium Silicate